The product image may differ
Gas volume l
0.32 l
p. max (bar)
210
pma : p0
8:1
Подробное описание продукта
HK HMS 0.32 210 ECO A
Gas volume l
0.32 l
p. max (bar)
210
pma : p0
8:1
p max - p min
140 bar
A
142 mm
B
20 mm
F
G 1/2″ -14
SW
32 mm
Ø D
93 mm
Gewicht
1.3 kg
Все свойства
Свойства
Material
- housing: C-steel
- diaphragm: ECO
Application
- Energy storage
- Emergency actuation
- Leak oil and volume compensation
- Shock absorption and pulsation damping
- Suspension of vehicles
Connections
- Oil side type A - female thread
Construction type
- installation preferably vertical, gas side top
Temp. range
- -32 °C to +115 °C
Customs tariff number
- 84798997
Все свойства
Описание изделия
Указания
Рабочее давление от 100 до 350 бар; мин. Рабочее давление должно превышать на 10 % давление наполнения газом.
max. gas filling pressure 130 bar
To protect the diaphragm, the reservoir should never be completely emptied on the oil side.
Описание
A hydraulic accumulator consists of two chambers (liquid side and gas side), which are separated by a flexible, gas-tight element. The liquid side is connected to the hydraulic circuit of the system. When the pressure in the system rises, the accumulator is filled with oil and the gas is compressed. If the pressure drops, the stored pressurised liquid is forced back into the circuit by expansion of the compressed gas.
Указание по заказу
Product variants
9 Results
Search
Показать чертеж с размерами
Наименование
p0 = gas charge pressure
pmax - pmin = admissible pressure fluctuation of the accumulator
Column selection
Gas volume l (l)
p. max (bar)
pma : p0
p max - p min (bar)
A (mm)
B (mm)
F
SW (mm)
Ø D (mm)
Gewicht (kg)
p0 = gas charge pressure
pmax - pmin = admissible pressure fluctuation of the accumulator
